7 effective suggestions and methods to save fuel in your vehicle

In this era where fuel prices are constantly rising and car manufacturers are turning to small volume engines, what should be taken into account to lower your consumption values ​​and minimize the cost of fuel you will be taking out of your pocket? In this content, we will make golden suggestions that will help you save fuel.

How to save fuel in petrol and diesel vehicles?

Vehicle fuel consumption can be reduced in many different ways. We have researched and compiled the most effective of these methods for you.

Here are tips to save fuel…

1. Take care of engine health and filters

First, make sure your vehicle’s engine is in good working order. Check that your engine and drivetrain are working properly. If you don’t have your engine maintenance done on time, fuel consumption will increase because the engine will be under pressure. Be careful not to waste time replacing the air and oil filters. Make sure you make your changes within the time specified in your vehicle’s booklet or with the service department. This has a positive effect on both your fuel consumption and the life of your engine.

2. Factors that interfere with weight and aerodynamics

Fuel saving

Get rid of unnecessary weight in your vehicle. Any unnecessary cargo you carry around in the trunk will add weight and thus have a negative effect on the engine and increase your fuel consumption. Modified devices that are unknowingly attached to the car to make it look good also increase your fuel economy because they increase friction and weight. If your vehicle is equipped with a roof rack, use it only when necessary. These upper stems also directly affect the aerodynamics of your vehicle and increase drag. Even when empty, it increases fuel consumption because it carries a certain weight.

3. Tire pressure and correct tire use

Fuel saving

Make sure your vehicle’s tire pressure is correct. Since tire pressure is the factor that affects friction the most, punctures cause piles and cause the engine to use more fuel, even if you’re not aware of it. Likewise, winter tires with their acceleration structure have a detrimental effect on fuel consumption. If you continue to use it in the summer season, fuel consumption will increase. When choosing your tires, their performance in terms of rolling resistance and fuel consumption is shown on the label. You should choose your tire by paying attention to this. In addition, the manufacturer must specify the correct air pressure in the door of your vehicle. You need to know how to adhere to these values. The right tire and the right pressure are also very important for your safety, which should not be forgotten.

4. Unnecessary use of air conditioning

Fuel saving

Use this option first when window ventilation is sufficient. Since air conditioners are installed on the vehicle’s engine, they directly affect fuel economy and performance. Especially if you have a small engine, you may have noticed how heavy your vehicle is when the air conditioning is on on slopes. Remember that your fuel consumption will increase due to this load. Try not to use the air conditioner constantly, even on long and straight roads. In addition to fuel consumption, conscious use of air conditioners is also good for your health.

5. Stop-Newst and sudden accelerations

Fuel saving

Avoid frequent stops and sudden accelerations. While it’s not possible to avoid stop-and-go in city traffic, you can reduce this by maintaining a certain speed. When the vehicles in front accelerate, accelerating behind them will cause you to brake suddenly. Your stop-go count will also increase. Because driving at a certain cruising speed often prevents you from coming to a complete stop, your stop-go rate decreases proportionally. Repeating the start and acceleration phases, when the engine is using the most fuel, will increase your fuel economy. Likewise, when the engine is loaded with sudden accelerations, the engine uses more fuel to give you the response you want. If you pay attention to avoid sudden accelerations and drive slowly, you will reduce your fuel consumption.

Pay attention to the traffic on the road you will be using and the current road conditions. You need to take this into account as both fuel and time are consumed on the road with traffic. When you want to save money on a shortcut, you can stay in traffic and increase your consumption values ​​by stopping and going. With navigation programs and various applications it saves you both time and fuel by checking for excavations etc. on the road you are going to. Similarly, your fuel economy will be adversely affected as you reduce your speed and shift faster if you are driving on a route with rough roads.

6. Use high quality fuel

Fuel saving

Try to make sure the fuel you buy is of good quality and refill from approved well known brands. The quality of the fuel you buy has a direct impact on performance and consumption. Since the energy produced by low-quality fuel will be low, the engine will be forced and try to compensate by consuming more. In addition, it should not be forgotten that low-quality fuels damage the engine and the environment. Using them may seem like saving you money at first, but as your engine gets damaged, your fuel economy will automatically increase. When you factor in maintenance costs, using low quality fuels will make you a loss, not a profit, in the long run.

7. Driving at speed and avoiding speeding tickets

Fuel saving

Depending on the type of engine, make sure you use your vehicle as described in the booklet. Diesel and gasoline engines have different usage patterns. Tools should be used with this in mind. Running your vehicles with hearsay advice puts a strain on the engine and increases fuel consumption. Since many engines today are produced with different technologies, do not be fooled by words such as diesel engine is used in this way, gasoline is used in this way. Use your engine as instructed in the manual and lower your consumption values. Your vehicle displays the most efficient fuel consumption values ​​at a given speed.

You can determine this speed by measuring the current consumption values ​​based on the power and type of your engine. If you maintain this speed, your vehicle will show you its most economical condition. It is the healthiest method to use your cruise control for this. Fuel consumption will increase rapidly at higher speeds. Likewise, driving at very low speeds will tire the engine. Avoiding them and achieving the best cruising speed will also minimize your fuel consumption. If you follow these recommendations, you will notice that your fuel consumption decreases. It’s a good idea to check your vehicle’s owner’s manual to get the values ​​closest to the factory data.

What practical ways can I use to save fuel in my vehicles?

Some practical fuel-saving tips include: obey the speed limit, maintain your vehicle regularly, check and adjust tire pressures regularly, don’t let your vehicle idle, and avoid heavy loads.

What vehicle modifications can be made to save fuel?

Some vehicle modifications include: aerodynamic improvements, air filter replacement, exhaust system replacement, tire replacement, and use of lighter wheels.

In which vehicles can I get the best results to save fuel?

In general, hybrid or electric vehicles offer higher fuel efficiency and consume less fuel. But fuel can also be saved in conventional vehicles, especially by carrying out regular maintenance and applying economical driving techniques.

Leave a Reply

Your email address will not be published. Required fields are marked *